Android version of my Density variation calculator.
It is a simple app that calculates allowable density variation under the rules of ASME Section V.
You measure the density in the body of a hole type IQI or next to the essential wire of a wire type IQI and then it calculates the min and max densities in the area of interest. The ranges are minus 15% to plus 30% ( except the plus 30% can be exceeded when using a shim under a hole type IQI).
Ug Calc is a simple Geometric Unsharpness calculator for Industrial Radiography.
All you have to do is plug in the distance from the Object (source side of the object or weld) to the film and to the source distances, along with the source size (diagonal).
This is not a difficult calculation to make but using this app makes it simpler and no need to keep looking up formulas.
NOTE: The source side of the object or weld on double wall exposure welds with Single Wall viewing is the inside surface of the pipe near the film. Basically the wall thickness (and maybe reinforcement).
On other welds it is more obvious where the source side of the object or weld is.
Click on the image below to enlarge.
Example problem: What is the Ug when the weld to film distance is 0.5 inches and the weld to source distance is 8 inches with a source size of 0.180 inches?
Answer: 0.011 inches of Ug. (Ug = (0.5 x 0.180)/8)
Code 313 is a calculator for interpreting industrial radiographs in accordance with ASME B31.3.
Please read this description and watch the video below (Coming soon) before purchasing to decide if this is the app for you.
The app caculates the most common discontinuities such as cracks, incomplete penetration, internal porosity, slag inclusions, and undercutting.
It also calculates IQI (penetrameter) sizes. It has three sections, welds with no reinforcement, and welds reinforced on one or both sides.
NOTE: The calculations for welds with reinforcement are based on the MAXIMUM allowable reinforcement. The code references the “ESTIMATED” reinforcement, so use the numbers in the app with this in mind and as just references.
This app DOES NOT replace the code itself nor the need to have the code. There are many other issues in the code that need to be referenced, this is just a calculator. One common example is you need the porosity ccomparison charts from the code for reference and need to be able to reference the rules and conditions.
Use this app at your own risk. No guarantee is made. recommended use is as a second opinion to your own interpretation.
This is an application to replace the aggravating usage of slide rules to calculate radiography shot times. It is applicable to Industrial Radiographers working with radioactive materials (not x-ray machines).